How to Fix Sewing Machine Tension Knob? Easy Guide For Sewers

How to fix sewing machine tension knob? This is the main concern for every sewer.

Well, the good news is that today I am going to tell you the proper solution to fixing the sewing machine knob.

Let’s dive in!

how to fix sewing machine tension knob

Having a proper tension on your sewing machine is very important because it ensures that your stitch will look the same and the same on both sides.

This helps ensure that your thread flows smoothly (pull tension to prevent the thread from moving during your sewing) while you are sewing.

Also Read: How to Repair a Sewing Machine at Home?

The tension is what keeps your bottom and top stitches in equal pull with each other. Or in other words that make your front and back stitches look the same.

If both of your upper and back stitches do not look the same, this may be because your tension is not fixed at the top or bottom. Both the top and bottom tensions will certainly work together.

How do You Know if Sewing Machine Have Tension Knob Problems?

If your stitching looks perfect and your sewing machine is sewing great, don’t touch your tension knots!

If you have a checklist of Threads magazines below and this is still not OK, I would suggest trying to adjust your tension slowly using a test scrap piece of fabric (never your project)!

You may check the following before touching your tension dial:

The right proper presser foot is attached for technique and fabric.

How To Fix Sewing Machine Tension Knob? Details Guide For All The Sewers

Remove the Properly Threaded Machine:

Have you used all the thread guides? Did you thread the presser foot, which will keep the thread from ticking discs back and forth?

Is this thread freely invisible to the spool, or does the spool slash it?

Are you using a bobbin as a spool (which can interfere with thread flow)? Is the bobbin properly?

Irty Messy Machine:

The link and thread terminate at the bottom of the throat plate, or around the bobbin case and the bobbin, increase the resistance and limit thread flow.

Check the “floss” in the tension disc with the raw cloth and the bobbin area for the thread edges and lint.

 Damaged Machine Parts:

 Flexible needles and bobbin and needle eyes, thread guides, tension discs, take-up levers, neck plates, presser legs, bobbin cases, and bobbin areas can all cause problems.

If you drop a metal bobbin on a hard floor, throw it away when it looks good; Minor casualty tensions can distort.

Avoid the loss of bobbin-tension spring by cutting the thread around the case before removing the bobbin Avo Raise the foot of the presser before removing the thread from the top tension.

Needles, Threads, and Clothes:

Different thread sizes and types in the upper and bobbin can drop the basic tension setting.

A needle too large or too small for the thread can cause your stitches to balance, because of the hole size Adds or reduces total top tension.

If you find that you are about to get a picker on a lightweight cloth, try changing the stretch stitch to the foot and needle plate, and reduce the stitch length to 1.75 mm (15 SST / in), before reaching these tension dials.

How do you Fix Sewing Machine Tension Knob?

Tension is like fighting a war. If both sides are equal then both sides are not winning. When one side wins and one loses, your tension is off.

The key to finding out how to turn on your tension dial is finding out which side wins and loses. Are your top thread lose and the bottom too tight?

Or is your top yarn tight and loose at the bottom? One way to make this way easier to say is two light-colored threads.

Using a piece of light-colored fabric to test what looks great against each other. The graphics below are a great way to illustrate this battle tug I think.

I would actually suggest placing the image below with your sewing machine for print and quick reference. Trust me it’ll work!

In order to understand the tension, you have to understand which way it is closed. I have found that understanding is the best way to learn it.

If you read the description above and think beyond it, I’m sure you’ll understand how to adjust your tension.

Recommended: History and Evolution of the Sewing Machines

How do you Increase or Decrease your Tension?

So now that you decide which thread is tight and which one to lose, how do you adjust it?

How to Adjust Top Tension?

First, you have to look for your tension control dial. It will be in a separate location on each machine so if you are not sure what knot it is, check your sewing machine manual.

If you don’t have a manual, it will have numbers that won’t change your type of stitch or length

If Top Tension is Loose:

To increase your top tension (if your top tension is loose), rotate your knot so that the numbers continue to increase. Continue not to look at it on both sides and you will no longer see the thread below.

What to do if the Tension is off?

As you sew, it is expected that the top and bottom thread are the same. If you notice that one side is getting stiff or loose on the other, there is a tension problem.

Simple tips on how you can check the tension of an instrument. Get a white piece of cloth and sew it with two different colored threads. This will help you see clearly whether you have problems with tension.

Final Words

If you get the tension just right, you can just do master class sewing. As we have discussed in this article, there are many reasons that the tension may be off.

When you notice that there is something wrong with the requirements, it’s best to follow the instructions in this article to get your machine hooked up properly.

I hope this article will teach you properly how to fix sewing machine tension knob.

Leave a Reply

Your email address will not be published. Required fields are marked *