Recent Posts

How To Oil a Sewing Machine? Easy Guide

If you are a sewer and don’t know how to oil a sewing machine, then this article will be helpful for you.

Sewing machines work better if you oil and clean it regularly. Sometimes for less oil, the machines start making a very annoying
noise. So, oiling and cleaning sewing machines are important. You don’t need to take your machine to someone to oil it. You can do it on your own.

how to oil a sewing machine

It saves you money and time. Whenever you feel like the machine is not working swiftly give oil in your machine. Frequently oiling keeps the machine durable. It keeps the inside parts of the machine durable.

The basic steps of how you can oil your machine at home are,

How to Oil a Sewing Machine: Step by Step Guide

Let’s start!

Firstly, gather the tools you need

Depending on your machine get oil or lubricant for it. Make sure you are getting the right oil for it. Many needs oil and many needs lubricant.

So knowing the type of your machine get it. Then for cleaning you will be needing brushes, soft fabrics, toothbrushes, etc.

The brushes should be small in size so that it can go into every corner. If you want to deep clean your machine then you may need to open some parts of it.

In that case, get some screwdrivers of different sizes. Get a box as well to store the screws or other small parts to avoid the risk of losing those.

After gathering everything organize everything near your hand so you can find everything easily. You can save time and work efficiently.

Secondly, clean the machine properly

Before you oil the machine it is very important to clean the machine first. If you oil your machine without cleaning, it will store all the dirt and damage the parts.

And in the future, the inside parts will get jammed and ruin the whole system of the machine. 

So cleaning the machine before oiling is important. Put away the additional parts from the machine for cleaning the inside of it.

If you don’t remove you still can work. But removing the parts will make your work easier. Make sure your machine is disconnected from power before you start cleaning.

You can use compressed air for cleaning the specks of dirt and dusts too. Using a fabric removes the specks of dust from the large areas.

For corners or inside places use a brush or toothbrush. Make sure you are cleaning it slowly. If you rush you can damage the parts of the machine. And it can ruin the total machine.

Then comes lubricating or oiling

Do not put a lot of oil in the machine at the same time. Use a few drops at a time and if needed a few drops more after waiting for a while. Too much oil makes the place messy and it gets hard to clean. If you accidentally put too much oil, take a fabric and clean it slowly.

The fabric should be dry and clean. Put a few drops in the hook race of the sewing machine too. After putting oil do move the parts manually for once. It will help to spread the oil in every area properly. And if the oil spreads in every area it will increase the performance of the machine. Sometimes for not having enough oil in the parts machines start to make noise.

This happens because the parts get dry. So when machines make noise you have to give oil or lubricant into the inside parts. Weekly 2-3 times you should oil your machine. Only then it will give its best performance.

Lastly, put the removed additional parts in the machine

After you are done oiling the machine now you can put the removed parts back. But before that make sure the oil has gone into the parts.

Clean the mess around the parts if there is any.
Then put every part that you removed while oiling the machine. Put the way it
was and make sure it is in the right position.

Do not miss to put any parts. If you don’t put the
parts properly in the right position you will face problems while using it. So
take time and put the removed parts in the machine.

Things to consider and be aware

If you use the machine every day then you should oil
it 3-4 times a week. And if you do bulk work every day then every day with a
few drops.

It helps to keep the machine quiet and work swiftly.
If you don’t oil your machine the inside parts will get damaged very soon. Some
machines do not require oil.

In that case, do not oil the machine. It can ruin
the whole machine. Some also require some specific type of oil or lubricant.
Check on these things before you oil the machine.


  • Regularly
    try to clean the machine even if you don’t oil it. Dust can clog the parts and
    slowly damage those. Damaged parts will cost a lot to change. Regular cleaning
    can help you with this. Also, cover your machine with something after you are
    done working.
  • Don’t
    put too much oil at a time. Only a few drops are enough to make it work
    properly. So don’t pour too much else it will be messy.
  • Oil
    the right parts of your machine. Only some specific parts need oil. To find out
    those and then give oil or lubricant.
  • Make
    sure the power is off when you are oiling the machine.

Final Words

How to oil a machine mostly depends on the type of machine. Nowadays every machine is updated and does not need oiling. But those that require oil needs oiling. As it increases the performance and longevity of the machine. So for better performance, you should oil your machine more often. Oiling is easy and you can do it yourself.

But if you don’t have a proper idea, get the idea and follow accordingly. A book with the details of oiling your machine is given with most of the machines. If you still feel it is complicated you can take the help of someone who knows how to oil a machine.

How to Make a Drop in Sewing Machine Table

How to Make a Drop in Sewing Machine Table? Know the Fact

If you are a sewer and do quilting or big projects then you must face a problem for not having a large surface area for working.

Here I am going to tell you how to make a drop in sewing machine table.

A large surface area helps and makes every work easy. Sewing machines do come with attached tables but not large enough for large projects.

how to make a drop in sewing machine table

So what if you make your own drop-in sewing machine table? Then you can work easily putting your whole fabric into a large area.

Following some steps, you can easily make a drop-in sewing machine table so let’s get started!

Firstly, Identify and arrange the things you need

You will be needing a table and it can be of wood or any other material. But we would suggest using wood as it is easy to cut through.

Then you will need a cutter to cut your material, a drill to make necessary holes and glue, screws, blade. Arrange all these in one place so that you can have everything near your hand.

 In The Case of not Having a Table

If you don’t have a table you can make one easily. With some easy steps make your table first to build the drop-in sewing machine.

The steps are:

Shape the tabletop

Wood or any material you want to make the top. It is better to use wood. After taking it to measure the shape you want.

After measuring take a marker and point out the shapes. Then take a saw and cut the wood. After you are done shaping the top put it aside.

Skirt structure

A skirt structure needs to be made because it will hold your tabletop. You can add drawers to store your things.

Determine the size of your machine and have a space for it as well. As this space is the main part make sure the measurements are right.

Shape the legs

Shape the legs of your table. Measure the legs and cut according to how high you want your table to be. After cutting the legs measure the size again to make every leg one size.

Join everything

The last step is joining every part with each other. First, take the tabletop and attach the skirt with it. Make sure to use screws and glues.

If it gets attached properly then keep it aside to dry the glue. After some time attach the legs turning the bottom of the table.

The legs need to be attached in the proper place. Use strong glue and if needed screws too.

You can easily make a table if you have all the necessary things near you. Just follow the steps properly.

Secondly, outlining the shape of the machine in the table

Mark the spot with the size of the machine where you want it to be placed. With a marker properly mark the size and make sure it is accurate.

Check 2-3 times after marking for accuracy. Then remove the machine aside.

Double-check the bottom of the machine where the sewing machine meets the table.

There should be no gap between the machines table surface and the wooden table’s surface.

This is the most important step so you have to be very accurate with the marks you make.

Thirdly, drill the marked holes and check machines fit

Drill the marked holes with the drill machine. After that cut, the marked areas with a cutting saw carefully.

After you are done cutting check if the machine fits properly or not. If the machine does not fit then make some necessary cuts to make it fit.

After it fits make necessary holes for the cables as well.

Next, building the base

Your table will have a base but it is necessary to make a base under the machine area for extra support.

Measure the width and length from the bottom of the table. Then cut the woods and attach it with the table.

You may have to overturn the bottom of the table for this work. Make sure you attach the screws tightly.

Use glue for attaching the particles more tightly. Set the glue for some to dry. It will make your table stable and strong.

Smooth out the edges

As you are done doing most of the main things now it’s time to finish the left-over works. You made the necessary cuts throughout the job.

Find out the sharp edges to make it smooth. Else you can cut your hands or scratch while you start working.

Your fabrics also may tear out from the sharp edges. So, it is necessary to smooth them out.

Furthermore, it also helps to make your table look good and professional.

Lastly, Attaching the sewing machine

Fit your sewing machine in the table carefully. Now fit the cables of the machines through the holes.

The perfect result will be a seamless surface that covers both the machines’ table and a wooden table.

For checking start the sewing machine and check if the table is stable or not. If everything is fine your table will not shake.

This is how you can easily make a drop-in sewing machine table for you at home on your own. The steps are very easy to follow.

You can take someone to have help you so that you can finish the steps easily and in less time.

Final Words On How to Make a Drop in Sewing Machine Table

Some things can be done by you easily at your home if you know how to do it. And most importantly if you have the necessary things with you to make it happen.

Life and work get easier if you make things how you like. If you make a drop-in sewing machine table on your own you can have a large area to work in. Also, some drawers in the table to store the necessary sewing items.

A table that was of no use can be turned into a drop-in sewing machine table. You will love to work in a big space. Works will be easier and fun to do.

You don’t have to compromise anything in that case and do work efficiently.

Brother Hc1850 Reviews of 2020 [Easy Buying Guide]

Looking for Brother Hc1850 Reviews of 2020? Read This One!

Whether you are looking for a sewing machine or something for quilting and embroidery- Brother is one of the best brands that you can rely on. So, buying a new and feature-based machine to sew? Then, before going for any other product, take a look at brother hc1850 reviews.

Who knows!

brother hc1850 reviews

You may need to search for any more options after that. Why? Because it is the best. This product will ensure that you will enjoy a great deal of sewing and quilting. Besides, there are lots of features on it.

Whether you are a beginner, an intermediate person, or an expert– you will enjoy every bit of your work through this machine. And the price, you will just love it!

When you want to buy something, one of the important part that matters most is- whether the other people have liked it?

Yes, this is the portion that we call ‘user review’ and guess what! Brother HC1850 has already won so many awards as well as the heart of its users.

It is very user-friendly. Besides, with its 100 built-in stitches and 55 monogramming fonts– your work as a beginner will portray the design of an expert person. 

Want to know about this product more? Here you go!

You may also like:

Brother PE800 Review

Brother Hc1850 Reviews: All the Features!


Brother HC1850 Sewing and Quilting Machine

Brother HC1850 Sewing and Quilting Machine
Brand: Brother

All the Features:

  • 1. Metal frame from both internal parts and outside too.
  • 2. Two-needle and thread merger
  • 3. 8-feet long and enough Wide table
  • 4. Easy user manual and DVD in both English/Spanish.
  • 5. LCD Display, LED light area.
  • 6. Total 130 built-in stitch options
  • 7. Automatic buttonholes (Includes 8 styles)
  • 8. Free flip stitch chart attached
  • 9. Fourteen quilting functions
  • 10. Sewing rate is high. 850 stitches pm.
  • 11. Controllable and adjustable sewing speed
  • 12. 0-9 numbers, A-Z fonts, total 7 punctuations, and many more symbols come built-in.
  • 13. The low shank can be used.
  • 14. The automatic needle threading process
  • 15. You will get a box full of important tools like- 3 bobbins, 3-piece needle set, ballpoint needle, twin needle, cleaning brush, eyelet punch, screwdriver, 3 spool caps, extra spool pin, seam ripper, etc.

Video Review Below!

Why Will You Buy Brother HC1850?

While you will buy a product, the first question will hit your head is- why this one? Why not the others? Very valid question. Here is the detailed reason behind buying Brother HC1850.

Easy to Set

Setting Brother HC1850 and starting your work with it is very easy. You just have to go through the manual. The Brother HC1850 manual is written in such a way so that even beginners can reach the process. But, if you can’t understand the process, you can take a look at the DVD.

After that, you just have to unbox the product, plug it and press the on button. Bobbin’s part is also not tough even. Place the thread in the bobbin place, remove the plate and start working. Can’t you put the thread into the needle? If you are using Brother HC1850, it will automatic. So, your burden will be less problematic.

Comfortable for the Beginner

Whether you want to quilt or sew, everything will be easier for you with this machine. You will enjoy controlling the speed through the speed controller. There are so many options and features attached to the product that, you will love working with it. Still, it will ensure 850 stitches per minute with perfection.

Good for Sewing and Quilting

Normally, if you are looking for a sewing machine, you need to buy one. Some other machine offers your quilting and the third machine provides you various design to do with different font. Brother HC1850 contains all of it. You can go to both of them if you use this product.

Various Stitch Choice

If you use this machine, you will have so many options to explore while stitching. There are different kinds of font and pattern that you can use.

You will enjoy 100 built-in stitches (94 decorative stitch functions, 42 garment construction stitches, 14 quilting stitch functions, 12 heirloom stitch, 8 styles of auto-buttonholes) and 55 monogramming fonts; of them one built-in monogramming fonts with A-Z, numbers 0-9, 7 punctuation marks, and 8 specialty symbols. So, even if you are a beginner, the process will be totally fun for you.

Easy Adjustment

So, you may are thinking about the places that you can do adjustments while using your sewing machine. There are lots of adjustments that you will love to do in this machine. These are- the length, the width, stitch speed, thread tension, etc. can be adjusted according to preference in this product.

Box of Tools

Maybe you have bought a sewing machine. But, there are lots of things that you will need to figure out once you got one of them. For every task, you will need different tools. And guess what! Brother HC1850 offers a full toolbox in its package.

You will get 3 bobbins, 3-piece needle set, ballpoint needle, twin needle, cleaning brush, eyelet punch, screwdriver, 3 spool caps, extra spool pin, seam ripper and many more things in it.


Even if this machine works amazingly, it is very lightweight. So, you can easily move it from one place to another. If you want to use the machine from a different place and carry it often, Brother HC1850 will be a great option for you.

Wide table and Built-in Sewing Programs

If you work in a bulk, you will need a wide table to place all the materials too. Brother HC1850 provides you this option.

LCD Display

If you want your work to be perfect, it would be always better to get a view of your work written somewhere. Brother HC1850 includes an LCD screen too. The working process of your machine, its condition- all will be written on the screen.

Does Brother HC1850 Perform well?

Every part of Brother HC1850 has been stated before in this article so far. But the question is, does this machine works well?

The best option to know the honest answer is going through some product reviews. But, then again, you can rely on my research too. Brother HC1850 is a very effective and fast-stitching machine. With its font variety, you will be able to sew any types of fabric. Through, you can avoid the excessive thick fabric. Others are very good to go. The best feature of this machine is, it can be used for heavy-duty. It has a bright LED light on its working portion too.

Through using all of its features, you will get to enjoy your work, do it in bulk amount and find the final result perfect. Most of the brother’s product is perfect. But you can expect much better from this one particular.

You will get the highest speed in this machine, while the foot controller will help you to control its speed. Even, you can control its sewing speed too. As a colorful and nicely made machine, your house will get amazingly decorated with this product.

Almost every user have expressed positive thought about this machine. Yes, I can assure you, it will be a great experience for you too.


  • Easy to set up
  • Needle replacement is easier
  • The price of this machine is pretty cheap
  • Easy to operate for the beginners
  • Provides speed controlling settings
  • Easily portable
  • This machine comes with a huge year of warranty


  • Some users find the product very light
  • You won’t get enough customer support in the 3rd world for this machine

Buying Guide of Brother Hc1850 Reviews: Things That You Should Think Before Buying it!

After completing this article, if you want to buy Brother Hc1850, this will be the best decision for you. But yet, every person is different. Their thinking process and choice is different. You may want something very different from what I want.

So, before buying this product or any product, think about these options.

Are you ready to buy it?

It is not about money, are you ready to buy it from a mental perspective? Sometimes, we get into a flow and buy something that we won’t use after once, ever.

Don’t buy a whole sewing machine for this thinking process. If you are not sure enough about your needs, then discuss it with some other people. It will help you to find the way rightly.

Is it budget-friendly for you?

Now, if you are ready to buy a sewing machine that can quilt too, you need to think about your budget.

You should spend only the amount that you really can. Brother hc1850 is very budget-friendly. Still, check your budget and find something within it.

How much speed and features do you want?

The amazing factor related to Brother Hc1850 is, you can get a good stitching speed, 850 stitches per minute out of it. You can even control it like the way you want. But, is the speed enough for you? Does the product include enough features that you want? Maybe, there are some other features that you want in your product and it is not in this sewing machine. Think about it carefully. Because the sewing machine is an investment that you don’t do every two months. While you are buying it, buy properly.

Is space enough?

Does this machine has enough space to convey your works? You can do a bulk amount of works through using Brother Hc1850. It provides good table width. Still, do match the space with your work.

In which country do you live in?

The most unfortunate thing is, you won’t find the company service in every country. So, buy something that will provide services in your country too. Otherwise, that may create some hassle for you too.

Have you gone through some review?

Though this Brother hc1850 Reviews should be enough for you to know the product, still try to go through some extra product review. It will help you to get a clear picture of the product right from its users.

How about the height, weight, and width?

You can use Brother Hc1850 right from the upper part and the lower shank. It has enough width too. Still, match it with your comfortable height and width.

There may be many more things that you want to check before buying your sewing machine. But be sure that, you have checked these points at least. It will help you to think straightly and get only that specific product which one you need.

Frequently Asked Questions

Can Brother HC1850 be used as Press On/ Low Shank?

Though it mostly depends on the setting of the machine, you can easily use Brother HC1850 as the low shank.

Brother or Singer- which one is better?

Both of them are good. But, the Brother sewing machine offers more features than the singer.

Is Brother HC1850 expensive?

No. It is very affordable.

How much weight Brother HC1850 can be?

Brother HC1850 is very lightweight. The total weight of this product is 17.37 pounds.

Does Brother HC1850 for denim can work?

No. It can break the needle. So, don’t use many thick fabrics in Brother HC1850.

Final Words

What Brother HC1850 provides in its simple and affordable package, you may won’t be able to enjoy them all together without a great cost?

But this sewing machine has tried to put every feature as much as possible in it. With it, you will get various options, fonts, and symbols too. From starting the machine to changing the needle- all you will get automatically done in Brother HC1850. So, you won’t have to put much effort into the process. There will be a variety. The amount of variation? You can’t even think about it! Combining all these portions, I found buying Brother HC1850 more convincing and effective. What do you think?

Are you satisfied with the features of the Brother HC1850 reviews? Yes? Then, just finalize the decision and go for it.

How to Use a Mini Sewing Machine?

How to Use a Mini Sewing Machine? Know the Facts

Knowing the vital point before using a mini sewing machine

Having the right knowledge about using anything will make you grow!

The world is updating like a stream of water, and we’re bringing slim figures to all devices with significant improvements.

Like that mini sewing machine is an updated form of a sewing machine.

how to use a mini sewing machine

A sewing machine is an exciting art for making beautiful garments. 

Do you want to save extra time and speed work with an efficient stitching machine?

Well, a mini sewing machine will give you all the benefits. It would impress you when sewing.

The easiest way to make money at home help is to feel comfortable. Consider this affordable and exciting machine to get the best job.

You should know the correct uses of all ingredients before operating it. Catch the vital point on how to use mini sewing machines. Please take it with purity!

Read also:

Mini Sewing Machine Means:

The mini sewing machine is a pretty, small, fast, workable motor. It’s a handy mechanism for quick sewing.

Operating mini sewing is cool learning as a child’s first step. These are Lightweight performing machines for smooth carrying. You should know about all the ways it’s before using it.

For Portable Mini Sewing Machines:

First of all, portable mini sewing machines are best for home base work. The small sewing machines will act more than other sewing machines.

Their perfect, slower stitching speed system makes it easy to feel for new users. 

How to use a Mini Sewing Machine: operating solution

A mini sewing machine is the best choice for a beginner. Essential facts, we have to know how to use a mini sewing machine.

Head: The head means a complete mini sewing machine. (Not the stand type)

Wheel: Installing to the right of the sewing machine head. The motor used to move the needle up and down. Remind its other name, Balance wheel.

Arm: Mechanism for handling the upper thread, driving the needle of machines.

Upright bar: Its place at the direct lower end which needle is joining. This bar used to hold the needle in place.

Pin spool: Spool pin used to thread sits of a mini sewing machine while you sew. Its place is at the top of the Arm.

Bed: Handling unique technique of shuttle, feet, and lower thread. The bed is the flat portion of under the head.

Bobbin winder: Bobbin is the main task to air the thread on your bobbin before sewing begins. The Bobbin Winder is a small plastic or metal pin.

Sewing regulation buttons: It depends on your machine style. There is one common combination for each device. That’s a few physical buttons on the front side.

These buttons select your own style, length of the stitch, and direction of stitching.

Please check before using your sewing machines is every button to determine the function.

Lever foot: The lever foot attached with the presser bar to control the presser foots Up and Down walking.

When you are sewing the presser foot into the lower place, to lift the lever you want to move stitching cloth.

Lever lifted to extract the material from this mini sewing machine.

Yarn cutter: This function acts as a yarn cut when you sew. Places are on the side of the presser bar.  

Bobbin tension disc: when you are winding a bobbin, the thread holds its action tight. Tension disc is a small numbered wheel.

Needle pass place/ flat disc: Small rounded flat drive of a mini sewing machine that allows a needle to pass through it. 

Presser’s foot finds: The presser foot is a metal attachment set with the bottom of the needle clamp. Like a tiny ski.

The machine is running; presser foot holds the fabric in places. It’s a sewing machine guide through your sewing.

Presser’s foot finds: The presser foot will be a lever to the right or back of the needle board.

Practice the presser foot raise and down way: Practicing the presser foot will be moving in all directions to the up and down process.

The needle plate finds: You have to, what is the needle plate? It’s a silver plate under the needlepoint.

Feed Dog: The feed dog is such a small metal guide. Under the presser foot on the needlepoint is a feed dog. It moves the fabric through with the sewing machine while you sew.

You can find it below the presser foot by looking for two small metal rows.

Bobbin cover: The metal plate of the needle is bobbin cover. That’s work is thread through supplied from the bottom of the mini sewing machine.

Bobbin free: The bobbin loose of a mini sewing machine provides sewing thread in the needles for the backing. 

Mini Sewing Machine Installation Process: 

  • Place the machine: Placing the sewing machine on a plane table or desk or cabinet in onwards of you. With the desk, you have to sit in a chair that is of comfortable height. Adjust the machine so that the body of the device is to the right side. And the sewing needle is to the left side. You will first have to test a few things. So don’t plug it in first. Get to know about the machine well.
  • Install the needle: Needles have a straight flat side .they can go through the machine just one way. Placing a needle and securing tighten the thumbscrew.
  • Wind and Insert bobbin/ uses of the thread: A mini sewing machine uses two thread ways. One a top thread and bottom thread. They are the storage in a bobbin. To Wind the bobbin through the machine, place the bobbin spool on the top side thread.
  • Thread inserts the machine: The spool on the thread is on top of the device. But thread adjusted to the needle. So, cotton set up through the top thread guide. 
  • Getting both threads
  • The machine plugin
  • Stitching select with a straight line and the medium way sewing length
  • Practicing a few scrap material
  • Set up the fabric through the needle with a straight line
  • Under the presser foot
  • Pressing foot pedal
  • Finding the inverse button
  • Using the handwheel to move the needle with the highest position
  • Cutting thread
  • A sewing practice for best make

Final Words

Thanks to all sincere readers for spending time with my operating solution. The above article has a few simple tips for using this machine.

You will get strong confidence to know how to use a mini sewing machine. Then you are just buying a small, slim sew device and operate with crisp motion. 

A mini stitch machine will give you a lightweight feel to carry those patches. All parts of mini sewing machines are present for a beginner. Just try it. Have a good time.

How to Fix Sewing Machine Tension Knob?

How to Fix Sewing Machine Tension Knob? Easy Guide For Sewers

How to fix sewing machine tension knob? This is the main concern for every sewer.

Well, the good news is that today I am going to tell you the proper solution to fixing the sewing machine knob.

Let’s dive in!

how to fix sewing machine tension knob

Having a proper tension on your sewing machine is very important because it ensures that your stitch will look the same and the same on both sides.

This helps ensure that your thread flows smoothly (pull tension to prevent the thread from moving during your sewing) while you are sewing.

Also Read: How to Repair a Sewing Machine at Home?

The tension is what keeps your bottom and top stitches in equal pull with each other. Or in other words that make your front and back stitches look the same.

If both of your upper and back stitches do not look the same, this may be because your tension is not fixed at the top or bottom. Both the top and bottom tensions will certainly work together.

How do You Know if Sewing Machine Have Tension Knob Problems?

If your stitching looks perfect and your sewing machine is sewing great, don’t touch your tension knots!

If you have a checklist of Threads magazines below and this is still not OK, I would suggest trying to adjust your tension slowly using a test scrap piece of fabric (never your project)!

You may check the following before touching your tension dial:

The right proper presser foot is attached for technique and fabric.

How To Fix Sewing Machine Tension Knob? Details Guide For All The Sewers

Remove the Properly Threaded Machine:

Have you used all the thread guides? Did you thread the presser foot, which will keep the thread from ticking discs back and forth?

Is this thread freely invisible to the spool, or does the spool slash it?

Are you using a bobbin as a spool (which can interfere with thread flow)? Is the bobbin properly?

Irty Messy Machine:

The link and thread terminate at the bottom of the throat plate, or around the bobbin case and the bobbin, increase the resistance and limit thread flow.

Check the “floss” in the tension disc with the raw cloth and the bobbin area for the thread edges and lint.

 Damaged Machine Parts:

 Flexible needles and bobbin and needle eyes, thread guides, tension discs, take-up levers, neck plates, presser legs, bobbin cases, and bobbin areas can all cause problems.

If you drop a metal bobbin on a hard floor, throw it away when it looks good; Minor casualty tensions can distort.

Avoid the loss of bobbin-tension spring by cutting the thread around the case before removing the bobbin Avo Raise the foot of the presser before removing the thread from the top tension.

Needles, Threads, and Clothes:

Different thread sizes and types in the upper and bobbin can drop the basic tension setting.

A needle too large or too small for the thread can cause your stitches to balance, because of the hole size Adds or reduces total top tension.

If you find that you are about to get a picker on a lightweight cloth, try changing the stretch stitch to the foot and needle plate, and reduce the stitch length to 1.75 mm (15 SST / in), before reaching these tension dials.

How do you Fix Sewing Machine Tension Knob?

Tension is like fighting a war. If both sides are equal then both sides are not winning. When one side wins and one loses, your tension is off.

The key to finding out how to turn on your tension dial is finding out which side wins and loses. Are your top thread lose and the bottom too tight?

Or is your top yarn tight and loose at the bottom? One way to make this way easier to say is two light-colored threads.

Using a piece of light-colored fabric to test what looks great against each other. The graphics below are a great way to illustrate this battle tug I think.

I would actually suggest placing the image below with your sewing machine for print and quick reference. Trust me it’ll work!

In order to understand the tension, you have to understand which way it is closed. I have found that understanding is the best way to learn it.

If you read the description above and think beyond it, I’m sure you’ll understand how to adjust your tension.

Recommended: History and Evolution of the Sewing Machines

How do you Increase or Decrease your Tension?

So now that you decide which thread is tight and which one to lose, how do you adjust it?

How to Adjust Top Tension?

First, you have to look for your tension control dial. It will be in a separate location on each machine so if you are not sure what knot it is, check your sewing machine manual.

If you don’t have a manual, it will have numbers that won’t change your type of stitch or length

If Top Tension is Loose:

To increase your top tension (if your top tension is loose), rotate your knot so that the numbers continue to increase. Continue not to look at it on both sides and you will no longer see the thread below.

What to do if the Tension is off?

As you sew, it is expected that the top and bottom thread are the same. If you notice that one side is getting stiff or loose on the other, there is a tension problem.

Simple tips on how you can check the tension of an instrument. Get a white piece of cloth and sew it with two different colored threads. This will help you see clearly whether you have problems with tension.

Final Words

If you get the tension just right, you can just do master class sewing. As we have discussed in this article, there are many reasons that the tension may be off.

When you notice that there is something wrong with the requirements, it’s best to follow the instructions in this article to get your machine hooked up properly.

I hope this article will teach you properly how to fix sewing machine tension knob.

How to Repair a Sewing Machine at Home? Easy Steps

How to Repair a Sewing Machine at Home? Know the Truth

No matter which brand you buy for every product you will face some problem periodically. So is for Sewing machines.

One wrong step can make your whole machine stop working. Sometimes the problems you face can be fixed by yourself.

how to repair a sewing machine at home

So before running to anyone sit first. Look into the machine for what is going wrong. Then try to fix it by yourself. It saves you time and money.

Below we will be talking about some basic problems that can be solved at home.

What are the Problems one can Face with the Sewing Machine?

Your sewing machine can have both internal and external problems. But of the cases it’s external and it happens for less knowledge about the using process.

You wrong using can make problems for you and your machine will stop working. The common problems you can face with a sewing machine are,

  • Needle keeps breaking
  • Breaking of bobbin thread
  • Skip in stitches
  • Noise in the machine
  • The sewing machine does not start

How to Repair a Sewing Machine at Home?

Let’s learn the details.

Needle keeps breaking

Your needle can break for several reasons. One of them is not using the proper size needle or the type of needle your machine needs.

Are you using the right needle? Check it first and if so then use the right needle. There are many sizes of needles.

You have to use different sizes in different fabrics. Size 9 or 11 works great for delicate and lightweight fabrics.

Size 14 works great for medium weight fabrics. And for heavyweight fabrics size, 16 and 18 is good. So you have to have a clear idea of the needle size else it will break continuously.

Also read: History and Evolution of the Sewing Machines

Breaking of Bobbin Thread

If the thread gets tangled into the bobbin case then it will break several times. Another reason can be lower thread tension is too tight. These can be easily fixed at home. So why going to repair outside and waste money?

Another thing you need to remember is your thread thickness should be less than the needle thread thickness. So make sure you are correctly using your machine before rushing to fix it.

Skip in stitches

Skip in stitches is a very common problem. In can happen for many reasons but can be fixed easily. If you insert the needle incorrectly your sewer then skips stitches.

So try to insert your needle properly and then try to sew again. Another reason can be a damaged needle. In this case, it can skip stitches.

The needle size also needs to be checked. The hook tip must be above 1mm the eyelet of the needle and as close as to the surface.

If too low or too high it skips stitches. So check out these things and you can repair the sewing machine at home.

Noise in the machine

After working for a while your sewing machine can start making a very annoying noise. This can happen for dirt in the motor and insufficient oiling.

Another reason can be the motors drive belts tightening. Check out these things and you can fix it easily at home.

Try to give lubricate and clean your machine twice a week. And cover your machine with something after you are done working.

It will save your machine from dirt and dust. If you don’t look up to these your machine will make noise.

So you better have good care of your machine. Still, if it doesn’t work then take to fix it by someone professional at fixing.

The Sewing Machine Does Not Start

This can happen for several reasons. One reason can be the main power switch is turned off. So before panicking check the power switch button.

If it off then turns it on and your machine will start working. Then if your drive belt breaks your machine will stop working.

In this case, you have to get it fixed. The motor sometimes gets damaged and the machine stops working. You have to replace the motor else it will not work.

Fabric Does Not Move Property

Depending on the fabric you have to adjust the feed dog of your machine. If it’s not adjusted properly your fabric will not move at all.

Besides that, if the needle you are using is damaged it will not give stitches and your fabric will not move.

In this case, you have changed your needle and use the right size needle.

Another reason can be the fabric you are trying to sew is not the type your machine can sew. So check these things and hopefully you will not face the same problem again.

Recommended: How to Fix Sewing Machine Tension Knob?

Are These Helpful Enough to Repair your Machine at Home?

As I already said if the problem is not external then it’s very easy and solvable at home.

You just need to have a proper idea of the using process of your sewing machine. If you are using it in the right way it will not stop working.

In the case of the external problems, you have to get it fixed. There is no way you can fix it at home until you are a professional.

So before rushing to get it fixed try at home. And we almost listed the basic problems one can face.

Mostly these happen for less knowledge about the using process. However, using correctly you will never face such problems easily.

And even if you do you can fix the sewing machine by yourself at home.

Final Words

Before rushing outside check your machine first. The problems can be easily solved if you know the problem. Clean your sewing machine every day because dirt damages the parts of the machines. Being a new sewer you can do things inappropriately and it can make problems too.

So if you learn how to fix by yourself you can fix it later as well. It saves a lot of money and increases your sewing skills too. However, every sewer should know the basic Sewing machine repairs and fixings. A basic repairing book is given with most of the machines which make your work easier